Download

Get Vendoke for Android and Windows, with firmware and tools for the coin acceptor.

Android

Vendoke kiosk app and the phone remote.

🤖

Vendoke Remote1.0

Pick songs and control the karaoke from your phone. • Type the songbook number and add the song to the queue • Next song, restart, tempo, key and volume buttons • Pair once with the QR code or the 6-digit code from the kiosk Admin, then it reconnects by itself • Works over the shop Wi-Fi or a phone hotspot. No internet needed • Works with Vendoke for Android and Vendoke PC for Windows Requires Android 7.0 or newer. On the kiosk open Admin, then Remote, turn the remote on and scan the QR code.

Download APK
🤖

Vendoke for Android1.0.0

Turn an Android tablet, phone or smart TV into a coin-operated karaoke kiosk. • Plays KAR/MIDI songs with word-by-word lyrics, MP4 videos and MP3 songs • Guests pick songs by number on the screen or from their phone with the Vendoke Remote app • Runs fully offline after setup: no internet, no streaming, no lag • Coin box over Bluetooth, score screen, your own background videos and SoundFont • Printable songbook, kiosk lock mode and phone remote control Requires Android 8.0 or newer. Download the APK, allow "Install unknown apps" for your browser when asked, install it, then open Admin and activate with your license key.

Download APK

Windows

Vendoke PC for Windows computers.

💻

Vendoke PC1.0.0

Turn a Windows computer into a coin-operated karaoke machine. • Plays MP4 videos, KAR/MIDI songs with word-by-word lyrics, and MP3 songs from the folders on your PC • Guests pick songs by number on a keyboard, numpad or phone remote • Offline activation with a license key made for your PC. No internet needed after setup • Coin acceptor over USB (ESP32 / ESP8266 firmware in the Firmware downloads) • Fullscreen, start with Windows, restart/shutdown and auto shutdown when idle Requires Windows 10 or 11 (64-bit). Unzip the file, run VendokeSetup-1.0.0.exe and follow the steps. Open Admin, then License, then Activate, then Offline to get your Device ID and activate.

Download For Windows

Firmware

ESP32 and ESP8266 coin acceptor firmware.

🔌

ESP32 Bluetooth coin acceptor firmware1.0

Coin acceptor firmware for ESP32 that connects to the Vendoke Android app over Bluetooth (BLE). • Counts the pulses from your coin acceptor and sends the total to the tablet • Bluetooth name: KaraokeTab. Pair it in the app: Admin, then Binding • Coin signal on GPIO 15, coin inhibit on GPIO 2 (easy to change at the top of the file) • The app turns the coin acceptor on only while a song is waiting for a coin For Vendoke for Android only. For a Windows PC use the ESP32 COM port firmware instead. How to flash: open the .ino file in the Arduino IDE, choose the board "ESP32 Dev Module", connect the ESP32 with USB and press Upload. DIAGRAM PIN - Coin pin: 15 - Set pin: 2 - Ground: GND

Download firmware
🔌

ESP32 COM port coin acceptor firmware1.0

Coin acceptor firmware for ESP32 that connects to Vendoke PC (Windows) with a USB cable. • Counts the pulses from your coin acceptor and sends the total as a line like {"c":12} over the COM port (115200 baud) • Coin signal on GPIO 15, coin inhibit on GPIO 2 (easy to change at the top of the file) • The coin acceptor is enabled as soon as the ESP32 starts • No Bluetooth and no Wi-Fi needed For Vendoke PC only. For the Android app use the ESP32 Bluetooth firmware instead. How to flash: open the .ino file in the Arduino IDE, choose the board "ESP32 Dev Module", connect the ESP32 with USB and press Upload. How to use: leave the ESP32 plugged into the PC, then in Vendoke PC open Admin, then Binding, and choose its COM port. DIAGRAM PIN - Coin pin: 15 - Set pin: 2 - Ground: GND

Download firmware
🔌

ESP8266 COM port coin acceptor firmware1.0

Coin acceptor firmware for ESP8266 (NodeMCU / Wemos D1) that connects to Vendoke PC (Windows) with a USB cable. • Counts the pulses from your coin acceptor and sends the total as a line like {"c":12} over the COM port (115200 baud) • Coin signal on D5, coin inhibit on D6 (easy to change at the top of the file) • Understands coins of different value from the number of pulses (1, 5, 10 and 20) • The coin acceptor is enabled as soon as the board starts • No Wi-Fi needed For Vendoke PC only. How to flash: open the .ino file in the Arduino IDE, choose the board "NodeMCU 1.0 (ESP-12E Module)", connect the board with USB and press Upload. How to use: leave the board plugged into the PC, then in Vendoke PC open Admin, then Binding, and choose its COM port.

Unavailable

Tools

Flasher, drivers and other helpers.

🔧

ADB (Android Platform Tools)37.0.1

Google's official Android Platform Tools (adb) for Windows. You need it to set up kiosk mode on a tablet with the device owner command. • Install the Vendoke APK from your PC with one command • Set Vendoke as the device owner to lock the tablet in kiosk mode • Check that the tablet is connected, and copy songs to it How to use: unzip the file, turn on USB debugging on the tablet (Settings, Developer options), connect it with a USB cable, open Command Prompt in the unzipped folder and run: adb devices

Download For Windows